LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee SRT >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal >> Bank 2

Bank 2

  1. Disconnect and isolate the negative battery cable.
    GC0170176Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the right side PCV hose (2) from the supercharger and position aside.
    GC0170244Courtesy of CHRYSLER GROUP, LLC
  3. Clean the area around Temperature and Manifold Absolute Pressure (TMAP) sensor (2).
  4. Disconnect the TMAP sensor wire harness connector (1).
  5. Remove screw (3) and the TMAP sensor (2) from supercharger.
scientia non olet · About LEMON Manuals