Module, Intrusion Transceiver: Installation: Installation
WARNING: This page is about a different car, the 2015 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Intrusion Transceiver Module (ITM) (2) into the mount integral to the overhead console housing. Be certain that all of the latch features are fully engaged
- Reconnect the intrusion module sensor pigtail wire harness connector (1) to the ITM connector receptacle.
- Reinstall the overhead console into the headliner. Refer to CONSOLE, OVERHEAD, FRONT, INSTALLATION .
- Reconnect the negative cable to the battery.