Throttle Body: Installation: 3.6L

Clean the mating surfaces of the throttle body and intake manifold.

Courtesy of CHRYSLER GROUP, LLC
Install a NEW O-ring seal onto the intake manifold.

Courtesy of CHRYSLER GROUP, LLC
Install the throttle body and tighten the four bolts (1) in a criss-cross pattern sequence to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Connect the throttle body wire harness connector (1) and secure the wire harness to the clip (2) on the throttle body.
Install the air cleaner body. Refer to INSTALLATION .
Connect the negative battery cable.