LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Crankshaft Position >> Removal

Sensor, Crankshaft Position: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the flexplate. Refer to FLEXPLATE, REMOVAL .
    GC0146607Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Crankshaft Position (CKP) sensor wiring harness connector (1).
    GC0146606Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolts attaching the harness connector bracket to the oil pan.
    GC0146603Courtesy of CHRYSLER GROUP, LLC
  5. Remove the bolt (1) and the CKP sensor (2).
scientia non olet · About LEMON Manuals