LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Altitude, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 648 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2017 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0172149Courtesy of CHRYSLER GROUP, LLC
  1. Install the coolant temperature sensor (1) into water pump housing and torque to 11 N.m (8 ft. lbs.).
    GC0158079Courtesy of CHRYSLER GROUP, LLC
  2. Connect the coolant temperature sensor wire harness connector (1).
  3. Fill the cooling system. Refer to STANDARD PROCEDURE .
    GC0146436Courtesy of CHRYSLER GROUP, LLC
  4. Install the engine cover (1).
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals