CROSSMEMBER, Front Fore And Aft: Installation: Installation
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front engine mount (3) on the crossmember. Install the mounting bolts (2) and damper (1). Tighten the bolts to 50 N.m (37 ft. lbs.).
- Position the fore-aft crossmember in the engine compartment and install the mounting bolts. Tighten the forward mounting bolts at the radiator support to 55 N.m (41 ft. lbs.). Tighten the rearward mounting bolts at the suspension crossmember to 55 N.m (41 ft. lbs.).
- Install the front engine mount thru-bolt (4). Tighten the bolt to 60 N.m (44 ft. lbs.).
- If equipped, install the engine belly pan.
- Lower the vehicle.