LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Electronic Control Modules (Service Information)) >> Module, A/C And Heater >> Installation >> Installation

Module, A/C And Heater: Installation: Installation

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Two Wire Harness Connectors, A/C Heater Module & Instrument Panel Support
GC0147665Courtesy of CHRYSLER GROUP, LLC
  1. Position the A/C heater module (1) to the instrument panel support (3) and connect the two wire harness connectors (2).
    Fig 2: Four Screws, A/C Heater Module & Instrument Panel Support
    GC0147666Courtesy of CHRYSLER GROUP, LLC
  2. Align the A/C heater module (2) to the two locator holes in the instrument panel support (4). and install the module onto the support.
  3. Install the four screws (1 and 3) that secure the A/C heater module to the instrument panel support. Tighten the screws to 2 N.m (17 in. lbs.).
  4. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
  5. Reconnect the negative battery cable.
  6. Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals