LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> C2204-24 - Switch 2 Request Signal - Signal Stuck High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
TERRAIN SELECTOR SWITCH
BODY CONTROL MODULE (BCM)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .

scientia non olet · About LEMON Manuals