LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Starting System (Service Information)) >> Switch, Ignition >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the ignition switch with steering lock to the steering column.
  2. Install the NEW  bolts and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
    NOTE:

    The head of the bolt is designed to snap off. Once the bolt is torqued to the proper specification, you will need to break the head of the bolt off.

  3. Install the steering column. Refer to COLUMN, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals