LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery (Service Information) >> Tray, Battery >> Removal And Installation >> 2.4L >> Installation

Removal And Installation: 2.4L: Installation

  1. Check that the battery tray is not damaged.
  2. If removed, install the PCM to the battery tray. Tighten the screws to the proper torque specification.
  3. Attach the washer fluid assembly to the battery tray.
  4. Install the battery tray to the vehicle.
  5. Secure the PCM to the battery tray.
  6. Connect the electrical connections to the PCM.
  7. Install the battery to the battery tray. Refer to BATTERY, REMOVAL AND INSTALLATION BATTERY, SUPPLEMENTAL, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals