LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery (Service Information) >> Cables, Battery >> Removal And Installation >> Negative Battery Cable >> Installation

Negative Battery Cable: Installation

  1. Position the negative battery cable for installation.
    GC0163272Courtesy of CHRYSLER GROUP, LLC
  2. Connect the cable terminal to the chassis ground (1a), then screw the nut (1b) and tighten it to the specified torque.
  3. Connect the terminal to the gearbox of the ground wire (1a), then tighten the screw (2a) and tighten to the specified torque.
  4. Install the left front wheel splash shield. Refer to INSTALLATION .
  5. Engage the ground lead to the retaining clip.
  6. Connect the terminal to the negative battery pole and to engage the retainer.
scientia non olet · About LEMON Manuals