Set Condition
- Rationality Check Of The Positive Engine Torque Request:
- A Positive Or Negative Engine Torque Request Is Sent Via Controller Area Network (Can) And No Positive Or Negative Torque Request Was Calculated By The Shift Control Software.
- Rationality Check Of The Positive Engine Torque Request Magnitude:
- A Fault Is Detected If One Of The Following Occur:
- The Actual Calculated Engine Torque Request And The Delivered Engine Torque Request Sent Via Can Are Both Greater Than A First Threshold For A Calibrated Amount Of Time.
- The Actual Calculated Engine Torque And The Delivered Engine Torque Request Sent Via Can Are Both Greater Than A Second Threshold For A Calibrated Amount Of Time.
- Rationality Check Of Speed Gradients During Gearshifts:
- The Difference Between The Actual Input Speed Gradient And The Actual Output Speed Gradient Multiplied By The Actual Gear Ratio Is Lower Than A Calibrated Threshold.