Forward Facing Camera Verification Test
- Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
- With the scan tool, erase Forward Facing Camera (FFCM) DTCs.
- Make sure that all accessories are turned off and that the battery is fully charged.
- If the FFCM was replaced or moved in any way, with the scan tool, perform the Forward Facing Camera - Calibration Procedure. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .
- With the scan tool, read FFCM DTCs.
Are there any DTCs present in the FFCM?
Yes
- Repair the FFCM DTC(s). Refer to DIAGNOSTIC CODE INDEX .
No
- Repair is complete.