LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Exhaust Temperature >> Installation >> Exhaust Temperature Sensor 1/2

Exhaust Temperature Sensor 1/2

GC0169885Courtesy of CHRYSLER GROUP, LLC
  1. Install the exhaust temperature sensor (1) and tighten to 45 N.m (33 ft. lbs.).
  2. Connect the exhaust temperature sensor wire harness connector.
  3. Remove the support and lower the vehicle.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals