LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Glow Plug >> Installation >> Left Hand Drive

Left Hand Drive

GC0124645Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (3) is located near the front of the battery (1).

  1. Connect the wire harness connector (4) to the glow plug module.
  2. Position the glow plug module (3) and install the mounting pin (2).
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals