LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Thermostat >> Installation >> 3.6L Coolant Crossover

3.6L Coolant Crossover

GC0144267Courtesy of CHRYSLER GROUP, LLC
  1. Clean gasket sealing surfaces.
  2. Install new gasket onto the coolant crossover.
    NOTE:

    The shorter M6 mounting bolts (2), bolt directly to the engine timing cover.

  3. Hand tighten the M6 mounting bolts. Tighten the bolts in a criss-cross pattern to 12 N.m (106 in. lbs.).
  4. Install the heater supply hose to the coolant crossover (1).
    GC0153982Courtesy of CHRYSLER GROUP, LLC
  5. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
    GC0144239Courtesy of CHRYSLER GROUP, LLC
  6. Install the thermostat housing. Refer to THERMOSTAT, INSTALLATION .
scientia non olet · About LEMON Manuals