LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Shaft, Intermediate >> Removal >> Upper Intermediate Shaft

Upper Intermediate Shaft

  1. Disconnect and isolate the negative battery cable.
  2. Lock the steering wheel with the tires in the straight ahead position.
    NOTE:

    The steering column on vehicles with an automatic transmission may not be equipped with an internal locking shaft that allows the ignition key cylinder to be locked with the key. Alternative methods of locking the steering wheel for service will have to be used.

    GC0148176Courtesy of CHRYSLER GROUP, LLC
  3. Remove and DISCARD  the bolt (1) for the upper coupler (2) at the steering column (4).
    GC0148175Courtesy of CHRYSLER GROUP, LLC
  4. Remove and DISCARD  the pinch bolt (2) at the upper intermediate shaft to lower intermediate shaft coupler (3).
  5. Remove the upper coupler (3) on the lower shaft from the upper intermediate shaft (4).
  6. Remove the two nuts (1) securing the upper intermediate shaft (4) to the cowl and remove the shaft (4).
scientia non olet · About LEMON Manuals