Diagnostic Test
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Replace the Occupant Classification Module (ACM)
- Make sure the battery is fully charged.
- Turn the ignition off, wait ten seconds and turn ignition on.
- With the scan tool, read the ACM DTC.
Did the scan tool display active or stored B2212-00-OCCUPANT CLASSIFICATION MODULE INTERNAL DTC?
Yes
- Replace the OCCUPANT CLASSIFICATION MODULE (ACM). (Refer to REMOVAL, ACM (+).
- Perform the OCCUPANT CLASSIFICATION MODULE (ACM) VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Perform the OCCUPANT CLASSIFICATION MODULE (ACM) VERIFICATION TEST. Refer to STANDARD PROCEDURE .