Sensor, Manifold Air Pressure (Map): Installation

Courtesy of CHRYSLER GROUP, LLC

1. The manifold air pressure (MAP) sensor O-ring (1) can be reused if not damaged.
2. Apply a small amount of engine oil to the sensor O-ring (1).

   Courtesy of CHRYSLER GROUP, LLC

3. Install the MAP sensor (1) into the upper intake manifold and rotate 1/4 turn clockwise.

   Courtesy of CHRYSLER GROUP, LLC

4. Connect and lock the electrical connector (1) to the sensor.
5. Install the engine cover. Refer to COVER, ENGINE, INSTALLATION .
6. Connect the negative battery cable.