LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Removal

Sensor, Accelerator Pedal Position: Removal

GC0085648Courtesy of CHRYSLER GROUP, LLC
NOTE:

The accelerator pedal and APPS (Accelerator Pedal Position Sensor) are serviced as a complete assembly including the bracket.

  1. Disconnect and isolate the negative battery cable.
  2. Disconnect the APPS wire harness connector (3).
  3. Remove the two nuts (2) and APPS assembly (1) from vehicle.
scientia non olet · About LEMON Manuals