Section 263 (Audio/Video/Entertainment/Connectivity (Service Information)): Operation

The audio system components are designed to provide audio entertainment and information through the reception, tuning and amplification of locally broadcast or satellite, (if equipped) radio signals in both the Amplitude Modulating (AM) and Frequency Modulating (FM) commercial frequency ranges.

The audio system components operate on battery current received through a fuse in the Body Control Module (BCM). The base radio receives an additional fused ignition RUN/START battery current feed from a fuse in the BCM.

The optional navigation radio system receives GPS signals from up to eight satellites to display the position and direction of the vehicle. Map information is supplied through a DVD-ROM. An electronic gyro-sensor and the vehicle's speed sensor enable the system to display the present vehicle position even in locations where GPS signals may be blocked.

When a destination is selected, the navigation system uses information from the map to quickly calculate a route. As the vehicle is driven along the chosen route, the operator is guided with pictorial displays and voice prompts.

On vehicles that are equipped with the optional remote radio switches, the BCM receives the input from the Steering Column Control Module (SCCM). The inputs are sent over the Local Interface Network (LIN) data bus from the remote radio switches to the SCCM. The programming in the BCM allows it to process those inputs and send the proper messages to the radio receiver over the Controller Area Network - Interior High Speed (CAN IHS) network to control the radio volume up or down, station seek up or down, preset station advance, and mode advance functions.