LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Drain the cooling system. Refer to DRAINING .
  3. Remove the radiator crossmember. Refer to CROSSMEMBER, RADIATOR, REMOVAL .
    GC0161813Courtesy of CHRYSLER GROUP, LLC
  4. Loosen the clamp (1) and remove the Charge Air Cooler (CAC) hose (2) from the EGR air flow control valve elbow.
    GC0161901Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the coolant temperature sensor wire harness connector (1).
    GC0161770Courtesy of CHRYSLER GROUP, LLC
  6. Remove the coolant temperature sensor (1).
scientia non olet · About LEMON Manuals