LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Cooling System) >> Engine >> Fan, Cooling >> Removal >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate negative battery cable.
  2. Drain the cooling system. Refer to DRAINING .
  3. Remove the radiator crossmember. Refer to CROSSMEMBER, RADIATOR, REMOVAL .
    GC0162044Courtesy of CHRYSLER GROUP, LLC
  4. Release retainer clip and remove upper radiator hose (1) from the radiator.
    GC0160702Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the wiring harness connectors from the cooling fan relays (1), the resistors (2) and the cooling fan motors (3).
    GC0160412Courtesy of CHRYSLER GROUP, LLC
  6. Separate the wiring harness (1) from the cooling fan shroud.
    GC0145992Courtesy of CHRYSLER GROUP, LLC
  7. Remove the radiator fan (3) by pressing the retaining clips (2) in and lifting upwards to release from mounts.
scientia non olet · About LEMON Manuals