Plug, Glow: Removal
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Remove the engine cover. Refer to COVER, ENGINE, REMOVAL .
- Remove the radiator crossmember. Refer to CROSSMEMBER, RADIATOR, REMOVAL
.NOTE:
The EGR Control valve only needs to be remove if glow plug No. 2 is being serviced.
- Remove the EGR air flow control valve. Refer to VALVE, EXHAUST GAS RECIRCULATION (EGR) AIRFLOW CONTROL, REMOVAL .
- Remove bolt and the glow plug wire harness bracket.
- Clean the glow plug bay area.
- Disconnect the glow plug harness connector (1).
- Remove the glow plug(s) (1) from cylinder head.