LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (3.0L Engine (Service Information)) >> Engine Block >> Rod, Piston And Connecting >> Installation >> Piston Pin

Piston Pin

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
GC0146761Courtesy of CHRYSLER GROUP, LLC
  1. Secure connecting rod in soft jawed vice.
  2. Lubricate piston pin (2) and piston (1) with clean engine oil.
  3. Position piston (1) on connecting rod.
  4. Install piston pin (2) into piston (1) and connecting rod.
    NOTE:

    Visually inspect the snap ring to ensure that it is correctly seated into piston seat.

  5. Install snap rings (3) in piston to retain piston pin (2).
  6. Remove connecting rod from vice.
scientia non olet · About LEMON Manuals