LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Charging (Service Information)) >> Generator >> Removal >> 3.6L

Section 249 (Charging (Service Information)): Generator: Removal: 3.6L

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the radiator cooler fans. Refer to FAN, COOLING, REMOVAL - 3.6L .
  3. Raise the vehicle.
  4. Remove the lower belly pan.
  5. Remove the air cleaner body (3). Refer to BODY, AIR CLEANER, REMOVAL .
    GC0160307Courtesy of CHRYSLER GROUP, LLC
  6. Remove the serpentine belt (1). Refer to BELT, SERPENTINE, REMOVAL - 3.6L .
  7. Remove the idle pulley (7) at the generator (6).
    NOTE:

    Evacuation of the A/C system is not necessary when repositioning the A/C compressor.

    GC0145963Courtesy of CHRYSLER GROUP, LLC
  8. Disconnect the electrical connectors (2) at the A/C compressor (1).
  9. Remove the bolts (3) and the nuts (4) at the a/c compressor.
  10. Position the A/C compressor aside.
    GC0147027Courtesy of CHRYSLER GROUP, LLC
  11. Disconnect the generator field electrical connector (1).
  12. Remove the B+ retainer (2) and remove the B+ cable.
  13. Remove the upper generator retainers (1).
    GC0159375Courtesy of CHRYSLER GROUP, LLC
  14. Remove the lower generator bolt (3).
  15. Remove the upper generator bolts (1).
  16. Remove the generator from the vehicle.
scientia non olet · About LEMON Manuals