LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Air Temperature, Inlet >> Removal >> Inlet Temperature Sensor

Inlet Temperature Sensor

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the EGR cooler. Refer to COOLER, EXHAUST GAS RECIRCULATION (EGR), REMOVAL .
    GC0161960Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the inlet air temperature sensor wire harness connector (1).
  4. Remove the inlet air temperature sensor (2).
scientia non olet · About LEMON Manuals