Sensor, Accelerator Pedal Position: Removal
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
The accelerator pedal and APPS (Accelerator Pedal Position Sensor) are serviced as a complete assembly.
- Disconnect the negative battery cable.
- Disconnect the APPS wire harness connector (1).
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove screw (1) and the accelerator pedal/APPS assembly (2) from vehicle.