Switch, Inertia: Installation
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the inertia switch onto the studs. Tighten the nuts (1) to 4 N.m (35 in. lbs.).
- Reconnect the inertia switch wire harness connector (2).
 Courtesy of CHRYSLER GROUP, LLC
|
- If required, reset the inertia switch by pressing down on the top of the switch.
- Install the lower dash cover.
- Connect the negative battery cable.