LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Chime/Buzzer/Driver Assist (Service Information)) >> Module, Park Assist >> Removal

Module, Park Assist: Removal

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
GC0160462Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery.
  2. Remove the trim from the right inner D-pillar (2) to access the Park Assist Module (PAM) (1) located within the D-pillar. Refer to PANEL, QUARTER TRIM, REMOVAL .
  3. Remove the two screws (3) that secure the PAM within the D-pillar.
    GC0160661Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the body wire harness connector (4) and the jumper wire harness connector (3) from the PAM (1) connector receptacles.
  5. Remove the PAM from the vehicle.
scientia non olet · About LEMON Manuals