LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Renegade Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Electronic Control Modules (Service Information)) >> Module, Electronic Steering Lock (ESL) >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column shroud. Refer to SHROUD, STEERING COLUMN, REMOVAL AND INSTALLATION .
    Fig 1: Electronic Steering Lock Module, Headless Screws & Connectors
    GC0169413Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the steering column stalk electrical connection (1) and move the wiring aside.
  3. Use a hammer and chisel to remove the headless screws (2a) and extract the electronic steering lock module (2b) from its housing.
    Fig 2: Electronic Steering Lock Module & Connector
    GC0169519Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the electrical connection (1a) and keep the electronic steering lock module (1b).
scientia non olet · About LEMON Manuals