LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Grand Cherokee SRT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Pump, Water >> Removal >> 5.7L/6.4L

Pump, Water: Removal: 5.7L/6.4L

GC0137090Courtesy of CHRYSLER GROUP, LLC
NOTE:

5.7L shown in illustration. 6.4L similar.

  1. Disconnect negative battery cable.
  2. Remove the air intake assembly. Refer to BODY, AIR CLEANER for 5.7L, BODY, AIR CLEANER for 6.4L.
  3. Remove the resonator mounting bracket.
  4. Remove cooling fan assembly. Refer to FAN, COOLING, REMOVAL .
  5. Drain coolant into a clean container. Refer to STANDARD PROCEDURE .
  6. Remove the upper radiator hose from the thermostat housing (1) and position aside.
  7. Remove serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
  8. Remove idler pulley (5).
  9. Remove belt tensioner assembly (4). Refer to TENSIONER, BELT, REMOVAL .
  10. Remove lower radiator hose from the water pump and position aside.
  11. Remove the upper metal heater tube from the cylinder head.
  12. Remove water pump mounting bolts (6) and remove pump (3).