LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Grand Cherokee SRT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 6.4L Engine (Service Information) >> Lubrication >> Control Valve, Oil Intake >> Installation

Control Valve, Oil Intake: Installation

GC0088106Courtesy of CHRYSLER GROUP, LLC
  1. Lubricate the Variable Valve Timing Solenoid (VVTS) rubber O-ring seal with clean engine oil.
  2. Install the VVTS and rotate into position.
    GC0144407Courtesy of CHRYSLER GROUP, LLC
  3. Install the VVTS (3) retaining bolt (2) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS  .
  4. Connect VVTS electrical connector (1).
  5. Install intake manifold. Refer to INSTALLATION  .
scientia non olet · About LEMON Manuals