3.0L Diesel
CAUTION:
The Thermostat and housing is serviced as an assembly. Do not remove the thermostat from the housing, damage to the thermostat may occur.
NOTE:
If thermostat is being replaced, be sure that replacement is specified thermostat for vehicle model and engine type.
- Disconnect and isolate the negative battery cable.
- Remove the engine cover (1).
- Drain the cooling system. Refer to STANDARD PROCEDURE .
- Remove the coolant hose (1) from the thermostat housing and position aside.
- Remove the bolts (1) and the thermostat housing (2) assembly.