LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Removal

Sensor, Accelerator Pedal Position: Removal

GC0080493Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the drivers side lower dash board close out panel.
  3. Disconnect the APP sensor wire harness connector (1).
  4. Remove the fasteners (2) and the accelerator pedal assembly (3).
scientia non olet · About LEMON Manuals