Sensor, Differential Pressure: Removal: 6.4L

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Raise and support vehicle.
3. If equipped, remove the transmission skid plate. Refer to PLATE, SKID, TRANSFER CASE, REMOVAL .
4. If required, remove the Differential Pressure Sensor (DPS) metal tubing fitting (4).
5. Disconnect the DPS electrical connector (2).
6. Disconnect the DPS hose (3).
7. Remove the bolt (1) with the DPS.
8. Remove the DPS from the bracket.