LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Compass Trailhawk >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System - Mp >> Column >> Wheel, Steering >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0179316Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the steering wheel switches.
  2. Position the steering wheel (3) on the shaft, aligning the references on the steering wheel and on the steering column.
  3. Connect the steering wheel wire harness connector (1).
  4. Install a NEW  steering wheel nut (2), and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS . A NEW  steering wheel nut must be used.
  5. Install drivers airbag. Refer to AIR BAG, DRIVER, REMOVAL AND INSTALLATION .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals