LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Pump, Water >> Installation >> Diesel

Pump, Water: Installation: Diesel

GC0147930Courtesy of CHRYSLER GROUP, LLC
  1. Using a NEW  gasket (2), install the water pump (3) with onto the cylinder head (1). Tighten the bolts (4) to the proper torque. Refer to TECHNICAL SPECIFICATIONS .
  2. Install the timing belt. Refer to the appropriate service information article. .
  3. Evacuate air and refill cooling system. Refer to STANDARD PROCEDURE .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  5. Check cooling system for leaks. Refer to DIAGNOSIS AND TESTING .