LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Pump, Water >> Installation >> 2.4L

Pump, Water: Installation: 2.4L

GC0098471Courtesy of CHRYSLER GROUP, LLC
  1. Clean the gasket mating surface.
  2. Using a NEW  gasket (8), install the water pump (4) and tighten the bolts (3) to the proper torque. Refer to TECHNICAL SPECIFICATIONS .
  3. Install the water pump pulley (2) and tighten the bolts (1) to the proper torque. Refer to TECHNICAL SPECIFICATIONS .
  4. Install the serpentine belt Refer to BELT, SERPENTINE, INSTALLATION .

    .

  5. Install the belly pan Refer to BELLY PAN, INSTALLATION .

    .

  6. Install the right front wheel house splash shield Refer to SHIELD, SPLASH, REAR WHEELHOUSE, INSTALLATION .

    .

  7. Perform the Air Evacuation and Coolant Fill Procedure. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals