LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal

Sensor, Boost Pressure: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover. Refer to the appropriate service information article. .
    GC0147935Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the boost pressure sensor (2) wire harness connector (1).
  4. Remove the bolt (3) and the boost pressure sensor (2) from the intake manifold.
scientia non olet · About LEMON Manuals