LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Removal

Sensor, Accelerator Pedal Position: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Disconnect the accelerator pedal wire harness connector.
    GC0162298Courtesy of CHRYSLER GROUP, LLC
  3. Remove the nuts (1) and the accelerator pedal assembly (2).
scientia non olet · About LEMON Manuals