LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Exhaust Temperature >> Installation >> 2.0L Diesel EGT Sensor 1/1

2.0L Diesel EGT Sensor 1/1

GC0153964Courtesy of CHRYSLER GROUP, LLC
  1. Install the Exhaust Gas Temperature sensor 1/1 (5) and tighten to the proper torque. Refer to TECHNICAL SPECIFICATIONS .
  2. Attach the EGT sensor 1/1 wire harness connector (3) to bracket (4).
  3. Attach the EGT sensor 1/1 wire (1) to heat shield (2).
    GC0153959Courtesy of CHRYSLER GROUP, LLC
  4. Connect the EGT sensor wire harness connector (1).
    GC0157479Courtesy of CHRYSLER GROUP, LLC
  5. Install the engine cover (1).
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals