LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Differential Pressure >> Installation

Sensor, Differential Pressure: Installation

GC0159583Courtesy of CHRYSLER GROUP, LLC
  1. Install the differential pressure sensor (2) and securely tighten the nut (1).
  2. Connect the differential pressure sensor vacuum hoses (4).
  3. Connect the differential pressure sensor wire harness connector (3).
  4. Install the engine cover. Refer to the appropriate article. .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals