Sensor, Camshaft Position, 2.0L Diesel: Installation: Diesel

Courtesy of CHRYSLER GROUP, LLC

1. Install the Camshaft Position Sensor (CMP) (1). Tighten the bolt (2) to the proper. Refer to TECHNICAL SPECIFICATIONS .

   Courtesy of CHRYSLER GROUP, LLC

2. Connect the CMP wire harness connector (1).
3. Install the crankcase breather hose.
4. Install the engine cover. Refer to .
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.