LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Renegade Trailhawk >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Removal And Installation >> 2.4L >> Removal

Removal And Installation: 2.4L: Removal

Fig 1: Block Heater Power Cord & Radiator Hoses
GC0171629Courtesy of CHRYSLER GROUP, LLC
  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  2. Disconnect the power cord plug from the engine block heater (3).
    Fig 2: Block Heater 2.4L Engine
    GC0128538Courtesy of CHRYSLER GROUP, LLC
  3. Lift the retainer clip (1) and slide the engine block heater (2) out of the engine block.
scientia non olet · About LEMON Manuals