2.4L Multi Air: Removal

Fig 1: Exhaust Heat Shield, Nuts & Bolts

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Remove the bolts (1a) and nuts (1b) and the exhaust heat shield (1c).

Fig 2: Transmission Oil Cooler Lines & Clips
Courtesy of CHRYSLER GROUP, LLC
Remove the retaining clips (1a) and disconnect the transmission oil cooler line (1b).
Plug and seal the ends of the transmission cooler lines and lines disconnected, to prevent leakage of oil or moisture, contaminates, or impurities entering into the system.

Fig 3: Pressurized Coolant Bottle & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the fasteners (1a) and the pressurized coolant bottle (1b).

Fig 4: Cooling Fan Wire Harness Connectors & Retainers
Courtesy of CHRYSLER GROUP, LLC
Disconnect the resistor wire harness connector (1a).
Disconnect the cooling fan wire harness connector (1b).
Detach the wire harness retainer (1c) from fan shroud.
Open the retainer (2b) detach the cooler lines from retainer.

Fig 5: Cooling Fan & Brackets
Courtesy of CHRYSLER GROUP, LLC
Release the retaining brackets (1a) and remove the fan cooling (1b).