Torque Specifications
WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m | Ft Lbs | In Lbs | NEW FASTENER* |
|---|---|---|---|---|
| Front bumper bolts | 45 | 33 | - | |
| Front belly pan bolts | 20 | 15 | - | |
| Front crossmember lower reaction rod front bolt | 90 + 45° | 66 + 45° | - | |
| Front crossmember lower reaction rod rear bolt | 90 + 45° | 66 + 45° | - | |
| Front suspension crossmember bolts | 120 + 45° | 89 + 45° | - | |
| Load beam bolts | 100 | 74 | - | |
| Lower load beam extension bolts | 45 | 33 | - | |
| Load beam support bracket bolts | 50 | 37 | - | |
| Rear bumper bolts | 25 | 18 | - | |
| Rear lower control arm to rear crossmember bolts | 125 | 92 | - | |
| Rear lower control arm to rear knuckle bolts + 90° | 100 + 90° | 74 + 90° | - | |
| Rear strut to rear knuckle + 90° | 100 + 90° | 74 + 90° | ||
| Rear suspension crossmember bolts | 120 | 89 | - | |
| Side belly pan bolts | 20 | 15 | - | |
| Sway bar link to stabilizer bar nut | 80 | 59 | - | X |
| Wheel speed sensor screw | 7 | - | 61 | |
| *NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. | ||||