LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (1.4L Engine (Service Information)) >> Engine Block >> Wheel, RELUCTOR >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
G00582047Courtesy of CHRYSLER GROUP, LLC
  1. Position the slot over the alignment pin (2) and install the reluctor wheel (1) on the crankshaft.
  2. If equipped with an automatic transmission, install the flexplate to the engine. Refer to the appropriate information.
  3. If equipped with a manual transmission, install the flywheel to the engine. Refer to REMOVAL AND INSTALLATION .
    NOTE: The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals