3.0L Diesel

Fig 1: Thermostat Housing & O-Ring Seal

Courtesy of CHRYSLER GROUP, LLC

Install a NEW O-ring seal (1) onto the thermostat housing assembly (2).

Fig 2: Thermostat Housing & Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the thermostat housing assembly (2). Tighten the bolts (1) to 11 N.m (8 ft. lbs.).

Fig 3: Coolant Hose
Courtesy of CHRYSLER GROUP, LLC
Install the coolant hose (1) onto the thermostat housing.
Fill the cooling system. Refer to STANDARD PROCEDURE .
Connect the negative battery cable.
Start the engine and check for leaks.

Fig 4: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Install the engine cover (1).