LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Electronic Control Modules (Service Information)) >> Module, Electronic Limited Slip Differential >> Installation >> Installation

Module, Electronic Limited Slip Differential: Installation: Installation

WARNING: This page is about a different car, the 2015 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electronic Limited Slip Differential Module & Connectors
GC0146895Courtesy of CHRYSLER GROUP, LLC
  1. Install the module in the vehicle.
  2. Secure the module mounting nuts (2) and tighten to 7 N.m (5 ft. lbs.).
  3. Connect the body wire harness connectors (3) to the module connector receptacle.
  4. Install carpet in original position.
  5. Install left rear seat. Refer to SEAT, REAR, REMOVAL .
  6. Connect the negative battery cable. For battery location and cable connection procedure, refer to CABLES, BATTERY, INSTALLATION .
scientia non olet · About LEMON Manuals